A VPN on your router covers every device on your Wi-Fi, including the ones that can't run a VPN app: smart TVs, games consoles, streaming sticks and smart speakers. It also saves device slots. NordVPN says a router uses one of its 10 slots however many devices sit behind it, and Proton VPN says the same for a router on its free plan. The catch is that your router needs a built-in VPN client, and most routers supplied by internet providers don't have one. Everything below follows the vendors' own help pages as they stood on November 4, 2026.
Check whether your router can run a VPN
Your router needs a VPN client for OpenVPN or WireGuard, the two protocols VPN providers give you files for. Surfshark and Proton VPN both say this is the requirement, and both warn that most routers from internet providers can't do it.
Surfshark lists routers that lack a VPN client on their standard firmware: Arris, Belkin, Cisco, TRENDnet, TotoLink, Ubee, Google WiFi and most internet provider routers. Linksys routers work only if they are on Tomato's supported list. Two families come up again and again as the easy option:
- Asus routers: Surfshark recommends Asus firmware because it is relatively easy to set up with a VPN, and Proton has guides for AsusWRT and AsusWRT-Merlin.
- GL.iNet routers: these ship with OpenWRT and an OpenVPN client already installed, according to Surfshark. ExpressVPN's Fortify router is built with GL.iNet.
To check your own router, sign in to its admin page (the steps are below) and look for a menu called VPN, VPN client or OpenVPN client. A menu labeled VPN server is something else: it lets you reach your home network from outside, and it won't send your traffic through a VPN provider.
Your three options
- Use the router's built-in VPN client. This is the quickest route if your router has one. You upload a file from your VPN provider and type in a login.
- Install open-source firmware. DD-WRT, OpenWrt and FreshTomato can add a VPN client to a router that doesn't have one. Proton warns that if you get this wrong, your router may stop working, and Surfshark says the same and accepts no responsibility for the damage. Check your exact model and hardware version against the firmware project's own list before you start.
- Buy a router with a VPN built in. ExpressVPN sells three: Aircove for homes and small offices, Aircove Go, a pocket-sized travel router, and Fortify. Aircove counts as one of the 14 devices on a single ExpressVPN subscription. Its VPN features need a subscription, and Fortify comes with 12 months of ExpressVPN Advanced for new and returning customers.
How to set up a VPN on a router with a built-in client
The menus differ by brand, so keep your VPN provider's guide for your router open as you go. The order of steps is the same everywhere.
1. Find your router's address. On Windows, open Command Prompt, type ipconfig and press Enter. The number next to "Default Gateway" is your router, often 192.168.1.1 or 192.168.0.1. On a Mac, open System Settings, then Network, select your connection, click Details and open the TCP/IP tab, where the address appears next to "Router."
2. Sign in to the admin page. Type that address into your browser. The username and password are usually printed on a sticker on the router unless you've changed them.
3. Get the setup files from your VPN provider. Sign in to your VPN account on its website and open the manual setup section. Pick OpenVPN or WireGuard (whichever your router supports), choose a server location and download its configuration file. Note the manual login it shows: Surfshark, for one, gives you separate credentials for manual setups that differ from your normal sign-in. For WireGuard, Surfshark makes you generate a key pair first and shows the keys only once, so save them.
4. Add the profile to the router. In the router's VPN client menu, create a profile, upload the file and enter the manual username and password if the router asks. Save and switch the profile on.
5. Check that it works. From a phone or laptop on your Wi-Fi, run an IP leak test and a DNS leak test. Surfshark, among others, has both on its website. The IP address should belong to the server you picked, not your internet provider.
If the router has no menu for this, or the menu accepts only a server address and no file, look up your exact model in your VPN provider's router guides before you consider new firmware.
What you give up with a router VPN
Surfshark lists the drawbacks itself. Your connection speed may drop, because a router has far less processing power than a laptop. You also lose most of the features in the VPN's apps, and switching location means signing in to the router's admin page again.
The whole house also uses one location at a time. That's a problem if one person wants a UK server for travel streaming while the rest of the house wants a local connection for banking. ExpressVPN's Aircove gets around this with up to five device groups, each with its own VPN location or no VPN at all. On an ordinary router, the simplest fix is to keep the VPN off the router and run the provider's app on the devices that need a different location.
One warning about older advice: ExpressVPN's own firmware for Asus routers supports only five older models, and ExpressVPN says security updates for it have ended. Don't buy one of those routers to run it.
Which VPN to use on a router
Any VPN that gives you OpenVPN or WireGuard files will work. The differences are device limits and how much router help you get.
- Surfshark allows unlimited devices at once, so you may not need the router at all except for the TV and console. Its help center has router guides for DD-WRT, AsusWRT, GL.iNet, OpenWRT and others.
- NordVPN covers 10 devices, and a router takes one slot.
- ExpressVPN covers 10 to 14 devices depending on your plan, and it is the only one here that sells its own routers.
- Proton VPN supports router setup on every plan, including its free plan, where the router counts as one connection. It has guides for AsusWRT, DD-WRT, FreshTomato, OpenWRT, pfSense, OPNsense and MikroTik, among others.
- CyberGhost covers 7 devices and supports routers running DD-WRT, Tomato, OpenWRT and AsusWRT using its OpenVPN files.
- Windscribe needs a Pro or Build-A-Plan subscription before you can download router configuration files.
For prices and a fuller comparison, see our guide to the best VPN software.






